LH 20A1H DRIVER DOWNLOAD

In this case wires cable was probably a source of problems. For some reasons I do not have much hope for working drivers of that beast. I must test it using new distributions. Then either the motherboard has a lousy design or you chose insufficient mounting positions for your drives. What do You think about? There are strange problems with both drives, especially with 20A1H. Not necessarily, but you should be informed about that.

Uploader: Nizragore
Date Added: 25 May 2006
File Size: 58.3 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 53239
Price: Free* [*Free Regsitration Required]

What do You think about? The high-speed cable has 40 pin also, but 80 wires. What kinda ribbon cable are you using? You could install the Liteon in an external case. Not necessarily, but you should be informed about that. And you can not rearrange your drives?

This one Delock can be flashed to non-RAID officially supported by the manufacturer and is lhh in several european countries.

Lite-On Dvd-rw Lightscribe Optical Drive Lh-20a1h DL IDE Black 48x 20x

For some reasons I do not have much hope for working drivers of that beast. Thank You for answer. Unfortunately, all my wires cables have second connector in uncomfortable position. The other drive as Slave and on the middle connector. The problem is not a total length of the cable but the 220a1h of the middle connector.

Recent Drivers  GSR203 DRIVER

Lite-On Dvd-rw Lightscribe Optical Drive Lha1h DL IDE Black 48x 20x | eBay

If 20q1h still have issues with the LiteOn, try a different cable. Anything different from the standard 18″ 45 cm flat ribbon cable might cause trouble.

But since you have that controller card, you can connect your Litey alone to the onboard controller, and your other drives to the controller provided you can get it up and running.

In this case wires cable was probably a source of problems. According to this review http: The PATA controller on the mainboard ensures comfortable boot options. There are strange problems with both drives, 20a11h with 20A1H.

Now, there are problems with Win7 drivers.

There are problems with this drive transfered to the new computer. There is no problem in 201ah a few millimetres of air between two ODD But since you have that controller card, you can connect your Litey alone to the onboard controller, and your other drives to the controller provided you can get it up and running Michael. Then either the motherboard has a lousy design or you chose insufficient mounting positions for your drives.

Recent Drivers  KONTORLAND JOYSTICK PC USB DRIVER

What do You think about configuration described above after changing the cable, of course? Hi, Some especially old drives, connected to the IDE port as pair, not work properly in master-slave configuration.

Lite-On 20x Internal PATA SuperMulti DVD Burner LHA1H B&H

Not knowing what kinda motherboard your using make it hard to know what and how your connections are. There is no problem in having a few millimetres of air between two ODD. What kinda motherboard do you have and did you update the BIOS firware?

If that still fails, the PATA controller on your motherboard may not work well with optical drives. I must test it using new distributions.